This work presents a simple and fast method for colchicine (CO) determination in pharmaceutical formulations and urine by multiple pulse amperometry (MPA) with flow injection analysis (FIA) system using a boron-doped diamond electrode. In optimized conditions, it was possible to quantify CO in urine samples without interference of uric acid and ascorbic acid. The working linear range for CO quantification was achieved from 1.0 × 10-7 to 0.5 × 10-3mol L-1 with a low limit of detection of 2.14 × 10-8mol L-1. Furthermore, the proposed method showed high repeatability for 10 consecutive injections of 1.0 × 10-4mol L-1 CO (relative standard deviation = 1.28%) and good analytical frequency (30 determinations per hour). The addition and recovery studies in all pharmaceutical samples were approximately 100% and the results for CO determination were compared by high performance liquid chromatography (HPLC) with UV detection.

The present work describes the development of a selective electrochemical sensor for urate based on tris(1,10-phenantroline)copper(II) bis(tetracyanoquinodimethanide) (Cu(phen)3(TCNQ)2) adsorbed on multi-walled carbon nanotubes (CNT). The composite material was characterized by infrared spectroscopy, scanning electron microscopy, and electrochemical impedance spectroscopy. The composite material showed an excellent electrocatalytic activity toward oxidation of urate. The heterogeneous charge transfer rate constant (k’) between the analyte and the sensor was determined using linear sweep voltammetry experiments. The composite material shows a linear range from 5 up to 2500 µmol L-1 with limit of detection of 1.05 µmol L-1 and limit of quantification of 3.50 µmol L-1. The high sensitivity and selectivity of the sensor for urate was sufficient for its determination in biological fluids. Finally, the proposed sensor was successfully applied in urine samples.